Martin Audio MA NETCONTROL Guia do Utilizador

The Martin ExperienceMA-NET1 & MA NetcontrolUser’s GuideAll material © 2007. Martin Audio Ltd. Subject to change without notice.

9Note: A separate, third-party network device must be accommodated in the system to create a LAN connection. This could raise reliability issues, p

10To establish a connection, use the following procedure: 1. In XP Home - Go to the START menu in the lower left corner, select “Connect to” and th

114.4 Establishing a wired or wireless LAN connection It is recommended that you make your LAN connections using a network device (hub, switch or r

12This window allows selection of an amplifier con-figuration for loading into MA Netcontrol. The choices are: Uploading information from connecte

13If you are certain that subnets have been connected, this could indicate a problem with the Windows Firewall, a physical connection, or the networ

145.3 Toolbars overview MA Netcontrol is organized around a set of views accessible by selecting buttons on the main toolbar. The different views ac

15 Offline: When not connected to a physical subnet, editing of an offline configuration is possible in Edit mode. You may add devices, add groups

16Each MA-NET1 may be configured for sequential power-up for all connected amplifiers in the Subnet (See the MA-NET1 Operation Manual). To access th

17use a slow left click, right click and choose Rename, or use the F2 key. Enter the new name for the device. Channels Channels may be renamed in t

185.4.8 Reconnecting to a subnet If connection to a subnet is lost (e.g. due to accidental disconnection of network cable), a Reconnect dialog wind

Operations Guide- MA-Net1 - Nomadlink/Ethernet Bridge MA Netcontrol - Network Control and Monitoring Software

196.3.2 Selecting Operate and Edit modes You may select Operate and Edit modes using the dedicated buttons on the toolbar. Alternatively, you may s

206.4.2 Device view columns Figure 10 Device name A default device name is assigned when uploading data from the subnet, or when configuring a ne

21DiP switch Match DIP switch Match is active only in the Online state and Operate mode. The indicator color represents the status of detected Physi

226.4.4 Matching to the physical subnet A transition from the Offline state in Edit mode to Online state automatically initiates the match function

236.6 Group view 6.6.1 Overview Group View (Figure 13) is the primary view used for real-time operation and monitoring when a system configuration

246.6.3 Group view fault and warning indicators (red) Fault condition for the Channel or Group (yellow) Warning condition for the Channel or Grou

256.6.5 Group and Subnet warning and fault icons When expanded (see 6.6.2) the Group module indicates any current faults and warnings in any Group

266.7.2 Subnet details The MA-NET1 Info tab displays information on the NomadLink Bridge and Network Controller controlling the subnet. Normally thi

276.7.3 Device details The Match Device tab displays information on the match status (if any) between the configured device and data uploaded from t

28 The Channel tab shows the level meter, temperature, and fault or warning indication. Solo and Mute button are active when the device is on and MA

2Contents 1 Warnings 4 2 Introduction 5 2.1 Hardware - MA-NET1 Nomadlink/Ethernet Bridge 5 2.1.1 Mains connection

296.8.2 Functionality Tree View provides quick access to details for any channel or subnet. Double click on the channel or subnet icon to bring up t

307 MA-NET1 warranty Martin Audio electronic products are warranted against manufacturing defects in materials or craftsmanship over a period of 3

36.4.4 Matching to the physical subnet 22 6.4.5 Device Sorting 22 6.5 Channels View

41 Warnings The lightning symbol within a triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the am

52 Introduction 2.1 Hardware - MA-NET1 The MA-NET1 NomadLink/Ethernet Bridge acts as a subnet master for up to 60 units of networked NomadLink-ready

6Rear panel detail 2.1.1 Mains connection To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture and

7This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may caus

83.2 Software installation Install the application by running the MA Netcontrol_Installer-1.2.0.exe (or later) installer. Follow the instructions a